Division Setup; Time & Date Setting - Gram TCamel S SERIE Manual De Utilización

DIvISION SETUP

When scale is on and at zero and stable, long press
division setup, use
confirm and back to weighing mode.
TIME & DATE SETTINg
Long pressing
press key (Down) to check Year, Month, Date, Hour, Minute, Second etc.
At this time, press
exchanged.
1. Revising mode: When the time begins to flicker, change related data,
press key to save the time and then back to checking mode.
2. Checking mode: If the data not saved, the time will not change after back
to checking mode.
Data show as follows:
1. Clk 24/12: (clock) choose between 24-hour system and 12-hour system.
Press key to make change.
2. APM A/P: (am pm) 12-hour system. "a" for "morning", "p" for "afternoon.
Press to make a change. In 24-hour system mode, it cannot be set,
showing "—".
3. yEA 00: (year) Input number for the accordingly year. "12" for "2012". The
largest number is 99. Press
Press key once, the other digit adds by "1".
4. Mon 00: (month) Input number for the accordingly month. "4" for April.
key to select the divisions, then press
and keys together enter time checking mode, then
key, checking mode and revising mode can be
key once, the decimal digit adds by "1".
key enter the
key to
23