Fixed Stand; Lift The Machine; Transport And Storage - Husqvarna TS70 Manual De Instrucciones

Fixed stand

When moving with the fixed stand, the legs can be stored
in the machine frame.

Lift the machine

• The extendible handles on the saw frame can be used
for manual lifting.
• Belts are used in the lifting eyes when lifting with a
crane.
CAUTION! Lifting hooks must not be
!
used in the lifting eyes intended for belts.
The use of lifting hooks will risk
damaging the fastenings.
20 – English
OPERATING

Transport and storage

• Stop the motor and disconnect the power cable before
lifting or moving the machine.
• Place the side table on the conveyor cart.
• Remove the water pump from the water tank. Empty
the water tank by lifting it out of the saw and carrying
it to the discharge point. Remove the cap on the tank
and empty the water. Clean the water tank.
TS70
• Secure the conveyor cart with the locking knob.
TS90
• Secure the support arm.