Remove The Cutting Arm From The Support Arm - Husqvarna TS70 Manual De Instrucciones

Transport
• Secure the equipment during transportation in order
to avoid transport damage and accidents.
Storage
• Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
• For transport and storage of Blades, see the section
"Blades".
Remove the cutting arm from the support
arm
When transporting in special circumstances such as
confined spaces and when low weight is desired, the saw
can be disassembled into smaller parts. The saw parts
then comprise of cutting arm and frame with support arm
and stand.
• Loosen the two screws so that the shaft can be pulled
out. Pull out the shaft, using the accompanying tool if
needed.
• Unscrew the mitre lock knob completely. Remove the
cables from the clips and disconnect the water pump.
OPERATING
–
English 21