Measuring Station - Hama EWS-3300 Instrucciones De Uso

5.2. Measuring station

• You can fasten the measuring station horizontally or vertically to
an outer wall using a mounting plate (26).
• If you want to mount the measuring station horizontally, use
rawl plugs, screws, etc. to fasten the mounting plate (24) using
the central cut-out (26) to the wall intended for installation.
• If you want to mount the measuring station vertically, use rawl
plugs, screws, etc. in the wall intended for installation and hang
the mounting plate (24) using cut-out (25).
• Gently push the measuring station until you hear a latching
sound ("click") as it engages with the clips (27).
6. Operation
Note – Input
Hold down the button (18) or the
the values faster.
6.1. Connection to the measuring station
• After you insert the batteries, the base station automatically
searches for a connection to the measuring station and performs
initial setup.
Note
• Initial setup takes approx. 6-8 minutes.
• During connection, the wireless symbol on the measuring
station will flash (13).
• Do not press any buttons during setup. Otherwise, values
may not be transmitted correctly and there is a risk of value
errors and inaccuracies.
• The setup process is completed when the indoor (10) and
outdoor (14) measurement data is displayed.
• If the base station still does not receive a signal from the
measuring station, press and hold the
3 seconds to start the manual search for the signal
4
button (19) to select
button (19) for approx.
Display
Display flashing
Displayed continuously
Displayed continuously
6.2. Basic and manual settings
Automatic setting using the DCF signal
• After the first time the base station is switched on and successful
transmission is established between the base station and the
measuring station, the clock will automatically search for a DCF
signal. During the search, the wireless symbol (4) will flash.
Display
/
Display flashing
Displayed continuously
Displayed continuously
Displayed continuously
Search for a signal from the
measuring station
Active
Successful –
signal is being received
Inactive –
no signal reception
Searching for the DCF signal
Active
Inactive – no signal reception in
the last 24 hours
Successful – signal is being
received
Successful – strong signal