Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION
The oilSPRAY gun has been designed specifically to spray thin vegetable oils
(with a viscosity of around 18 DIN/sec) to thicker butter fats (of up to 36 DIN/sec),
based on normal working environmental temperatures. The power settings and nozzle
& piston sizes enable a thin layer of material to be sprayed, whilst benefitting from
reduced overspray or noise compared to other sprayers.
Working with materials other than oil or with a significantly lower or higher viscosity
may affect the sprayer's performance. More information relating to the sprayer`s
recommended usage is provided below.
Technical Data
Nominal Output:
Delivery Rate*:
Viscosity rate*:
Container Capacity:
Weight approx.:
Sound level**:
* Based on thin to medium viscosity oils.
** Average, based on approximately 2 meters distance and height.
FOR YOUR SAFETY
The oilSPRAY gun should only be operated safely when the safety & operating
instructions have been read and are strictly adhered to.
•
Only connect the power plug when the sprayer is OFF and never carry by the
power cord.
•
Never direct the spray jet towards people or animals as it can cause injury.
Keep the sprayer and accessories out of the reach of children.
•
The sprayer must not be used in locations where explosive gases may occur or to
spray inflammable liquids (e.g. petrol or spirits). Ensure that there is adequate
ventilation when working in confined spaces.
•
At no time should the electrical components be brought into contact with liquids of
any type. Recommended cleaning methods are explained on page 5.
•
The oilSPRAY noise level is similar to many kitchen appliances. The decision to
use ear protection remains the users responsibility.
30 W
80 - 140 g/min
18 - 36 DIN/sec
550 ml
1.2 kg
75 dB
3
Publicidad
Tabla de contenido
