Driving The Scooter Over Steps; Operator Control - Vermeiren Carpo 2 Manual De Instrucciones

2.9

Driving the scooter over steps

It is possible to drive with your scooter over steps from 100 mm. Please start from 500 mm to take
these step.

2.10 Operator control

2.10.1 Operator control without LCD screen

Put the ON/OFF key switch on, please wait for at least 3 seconds before you press the speed
lever otherwise you have a "delay protection" alarm.

Now the battery level indicator  will light up and shows the current level of your batteries.

Now turn the speed switch () to the desired driving speed.

Push the drive lever with your fingers toward the handle bars (right lever for forward movement,
left lever for backward movement).

To sound the horn, press the horn button .

To put on the front and back lights, press the light button .

To put on the emergency flashers, press button .

To put on the indicator lights, press the desired button  and  (left = left indicator, right = right
indicator).

To stop the scooter loosen the speed lever under the operator control.
Page 15
Carpo 2
2015-07