Operator Control; Operating The Brakes; Driving The Scooter - Vermeiren One Manual De Instrucciones

• When driving indoors, only use the lowest speed setting.
• Do not turn your scooter "OFF" while driving as this will lead to an emergency stop and
possible risk of accident and injury.
• Keep the braking distance in mind, see also the technical specification in chapter 6. Be aware
that the braking distance depends on speed, surface, weather conditions, slope and weight
of the user.
• Pay attention if the road has holes or gaps that may cause entrapment of the wheels.

3.2.1 Operator control

• Switch the scooter ON by inserting the key (4).
• The battery level indicator (1) will light up and show the current level of your batteries.
• Turn the speed control switch (2) to the desired driving speed.
o Turn clockwise to increase speed control.
o Turn counterclockwise to lower speed control.
• To sound the horn, press the horn button (3).

3.2.2 Operating the brakes

To apply the electromagnetic brakes:
1. Let go of the speed lever. The electromagnetic brake in the motor will be activated, the
scooter will stop.

3.2.3 Driving the scooter

WARNING
• Do not use both sides of the speed lever simultaneously. This might leave you unable to control
your scooter.
Move the speed lever in the required direction:
PULL ACTION BY THE RIGHT HAND
PULL ACTION BY THE LEFT HAND
Pulling the lever more will increase the speed within the selected speed setting. Only use higher
speed settings when you are confident that you can easily operate and control your scooter.
When you switch on the scooter, wait for 3 seconds before pulling the speed lever. Otherwise,
the horn will sound as a warning and the scooter will not move. If this is the case, switch OFF the
scooter and switch ON again.
Risk of injuries
1. Battery level indicator
2. Speed control (slow/fast)
3. Horn
4. Key
5. Speed levers
= FORWARD MOVEMENT
= BACKWARD MOVEMENT
9
EN
One
2022-09
Using your scooter
NL