Invacare Aquatec R Manual Del Usuario página 10

®
Aquatec R / F / XL
IMPORTANT!
– Ensure that the suction cups are mounted.
– Ensure that the battery in the hand control is charged.
– Ensure that the spindle foot is fully inserted.
– When lifting, please remember: the seat weighs 7.5 kg,
the backrest 4.6 kg (without the hand control).
– If the bathtub has a handrail, use the side flap diverters.
– Fold the side flaps outwards before raising the
backrest.
B
A
1. Place the seat B on the bottom of the empty bathtub. Ensure
that the spindle foot retainer C is pointing towards the end of
the bathtub opposite the drain A.
10
C
2. Fold the side flaps of the seat outwards.
D
Place the backrest A (without the hand control) onto the seat
3.
so that the hooks B of the backrest fit into the hinges C of
the seat plate D.
A
B
C
1471194-A