Setting Up The Bath Lift - Invacare Aquatec ORCA Manual Del Usuario

Backrest
A Jack plug
B Drive
C Spindle foot
D Locking pin
E Plate, backrest
1574469-A
Hand control and charger
A
F
E
A Hand control with battery
B
Mains plug
C Charger
D Hand control spiral cable
E Jack socket of hand control
F Jack plug of charger

3.3 Setting up the bath lift

WARNING!
Risk of slipping
The bath lift can slip if the suction cups do not have
a good hold.
– Clean the bathtub and the suction cups with a damp
cloth before setting up the bath lift.
– Do not change the position of the bath lift in the
bathtub once it is set up.
B
C
D
Setup
9