Operation; Operating The Stand Up Lift; Closing/Opening Legs Of The Base; Locking/Unlocking The Rear Swivel Casters - Invacare RPS350-1E Manual De Uso Para El Propietario Y Manual De Mantenimiento

Ocultar thumbs Ver también para RPS350-1E:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

FIGURE 2 - ATTACHING ELECTRIC ACTUATOR TO MAST

OPERATING THE STAND UP LIFT

Closing/Opening Legs of Base (FIGURE 1)
The shifter handle is used to open or close the legs of the
base for stability when lifting a patient.
1. Stand at the rear of the stand up lift and grasp the
shifter handle with one (1) hand and place the oppo-
site hand on the push handle of the mast for balance.
NOTE: The shifter handle MUST lock into its mount-
ing slot to lock legs in the full open or closed position.
CLOSING
Legs of Base
Shifter Handle in Locked
OPENED Position
OPENING
Legs of
Base
FIGURE 1- CLOSING/OPENING LEGS OF
BASE
Top Nut
Lift Arm
Mounting
Bracket

OPERATION

Shifter Handle in Locked
CLOSED Position
Mounting Slot
Mounting
Slot
Bracket
Top
Bolt
Bushing
Electric
Actuator
CLOSING.
1. Pull the shifter handle OUT and away from the
stand up lift and then to your LEFT until it LOCKS in
the notch of the bracket.
NOTE: Left is determined by standing behind the stand
up lift facing towards the front casters.
OPENING.
1. Pull the shifter handle OUT and away from the
stand up lift and then to your RIGHT until it LOCKS in
the notch of the bracket.
NOTE: Right is determined by standing behind the
stand up lift facing towards the front casters.
Locking/Unlocking the Rear Swivel
Casters (FIGURE 2)
1. Perform one (1) of the following:
A. LOCKING - Press DOWN on the BOTTOM of
the locking lever.
B. UNLOCKING - Press DOWN on the TOP of the
locking lever.
STEP HERE TO LOCK
FIGURE 2 - LOCKING/UNLOCKING THE
REAR SWIVEL CASTERS
7
OPERATION
STEP HERE TO UNLOCK
Locking
Lever
O
P
E
R
A
T
I
O
N

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido