3.10. CALENDAR Menu
User menu
/8
On/Off
Schedule
Heating
/8
Date/Time
Day:
Date:
//5
Time:
Daily saving time
Enable:
Transition time:
Start: Last
in MAH
at
End: Last
in OTOBE
at
Night-time
Enable
min
Start:
End:
ompressor:
Air Unit:
3:
XXXXXX schedule
Enable:
Day:
MONDAY
opy to:
MONDAY
: 4:
ON
: :
ON
3: :
ON
4: 4:
OFF
Holiday schedule
Enable:
State:
Swiched Off
Sp Season
Start Stop
Month/Day / /
Month/Day / /
3Month/Day / /
3.11. HEATING Menu
3/8
Heating
Enable:
StopT:
3/8
Heating
Enable:
StopT:
Heating buffer
SetT:
DTstart:
Date/Time
Sunday
This is used to adjust the day of the week, date (DD/MM/YY) and time (HH:MM 24-hour
format) of the controller.
7:5
Daily saving time
min
The settings of automatic time change between seasons (autumn-winter / spring-summer)
SUN
can be adjusted.
:
SUN
3:
Night-time
This is used to set up a daily time period when the maximum speed of the compressor or
3:
unit heater is limited. This function is especially useful to reduce noise emissions at night.
7:
5%
4%
DHW Schedule / Heating Schedule / Cooling Schedule / Pool Schedule / BC Schedule
This allows programming up to 4 time periods for each day of the week.
NO
45
Independent time schedules can be set up for DHW, HEATING, COOLING AND POOL
55
services. A complete time schedule can also be set up to switch the heat pump on / off.
4
Holiday calendar
This can be used to program up to 3 periods a year when the heat pump stays on or off.
Heating
This enables the HEATING mode and adjusts the heating cut-off temperature. The HEATING
mode is never activated for temperatures over the cut-off setpoint.
The
icon indicates that there is a time schedule activated in the HEATING mode.
Heating buffer
This shows the setpoint temperature of the buffer storage tank and allows adjustments to
5
5
be made to the start-up temperature differential.
44
User manual ecoGEO