Pool Menu; Information Menu - ECOFOREST ecoGEO HP Serie Manual Usuario

3.14. POOL Menu

User menu /8
DHW/Legionella prot
Pool
Information
/8 Pool
Enable:
Winter program
Minutes per hour:
Pool
Enable:
emote control: OFF
SetT:
DTstart:
Auxiliary pool X
Emergency:
Support:


3.15. INFORMATION Menu

Press for quick access to the information menu from the main screen.
User menu 7/8
Pool
Information
Alarms
7/8 Brine/Production
Brine
Outlet:  35 
Inlet: 5 99 
DT: 3
Press: 
Pumps: 95 87
XXXXXX XXXXXX
Ground
OutT: 5
InletT: 38
atio: 575 45
FOP:
DT air unit:
DTdefrosting:
Outdoor temperature
OutdoorT:
35
35
35
Pool
Used to enable the POOL mode.
In versions for ecoGEO B and ecoGEO C, it can be used to adjust the percentage of

minutes/hours that the heat pump is dedicated to the POOL mode when there are
simultaneous demands for heating and pool during the WINTER program.
In versions for ecoGEO HP, it can be used to adjust the setpoint temperature and the start-
up temperature differential of the pool.
5
 The icon indicates that there is a time schedule activated in the POOL mode.
Auxiliary pool X
This is used to enable the auxiliary POOL system in both EMERGENCY and SUPPORT mode.
In EMERGENCY mode, the auxiliary system is activated automatically if there are any active
alarms that prevent compressor start-up.
In SUPPORT mode, the auxiliary system is activated automatically for normal POOL
production, as programmed by the technical service.
Brine/Production
Heat
This shows the inlet and return temperatures, temperature difference, current pressure
5  and the percentage of circulator pump regulation in the brine and production circuits.
4 bar
%
Hybrid / Heat Unit System
Air
38 
In hybrid brine systems (geothermal-aerothermal), it displays the inlet and return
54 
% temperatures and the percentage of energy absorption in each brine system. It also

displays the air-antifreeze temperature difference, the aerothermal operation factor (FOP)
4 
8 
and the estimated setpoint for the defrost program to start up.
In exclusively aerothermal brine systems, it only displays aerothermal information.
Outdoor temperature
Shows the current outdoor temperature.
47
47
User manual ecoGEO