Operating The Front Panel; Symbols Used - Solter aeroprocess 4000 CC Manual De Instrucciones

OPERATING THE FRONT PANEL

A- Welding type selector. This button lets you select between the different types of welding offered by the machine.
The selector is sequential, so each time it is pressed, a new type of welding is selected.
B- Selector of adjustable parameters for constant current (CC) welding.
C- Selector of adjustable parameters for constant voltage (CV) welding.
D- Main panel displays. These displays show all the values selected: welding variables, menu option and the current
and voltage values of the welding process.
E- Main control. With this selector you can select menu options and adjust the settings of the different parameters.
The value that can be modified always appears in flashing mode.
F- Menu selector. With this button you can enter and exit the advanced parameter setting menu. To move or change
a menu option, use the main control (E).
G- Button to activate the remote control (optional accessory).
H- Machine status indicator. This part, displays several indications: fault, remote control activated, safe output volta-
geactivated and power output activated.

SYMBOLS USED

Amps
Arc dynamics
in MIG
Worked time
Program
functions
Hot Start voltage
in CV mode
SOLTER
SOLDADURA S.L.
A
B
C
H
Welding
voltage
Firmware release of
Software version
the user interface
Factory settings Program access
Enabled
function
Hot Start time
in CV mode
D
E
Hot-start Hot-start time
current in MMA
firmware release
Save program
Disabled
function
AEROPROCESS
F
G
Force-arc current
in MMA in MMA
Power unit MIG-MAG synergic
database version
Load program
in memory from memory
Confirm Cancel
7