Intended Use Of Belt Sander; Safety Instructions - Dexter 900BS2.5 Manual De Instrucciones

FR

1. INTENDED USE OF BELT SANDER

ES
This machine is intended to be used for dry sanding with suitable sanding belts. It is
PT
suitable for surface grinding on wood, metal, plastic, ller, removal of layers of old paint,
intermediate grinding and rust removal. Do not use machines, tools and accessories for
IT
additional applications (see manufacturer's instructions) for works other than those for
which they are designed for. All other applications are expressly ruled out. Do not use
EL
machines in severe cold, moist or other extreme environments.
PL

2. SAFETY INSTRUCTIONS

UA
GENERAL POWER TOOL SAFETY WARNINGS
RO
WARNING! Read all safety warnings, instructions, illustrations
EN
and speci cations provided with this power tool. Failure to follow all
instructions listed below may result in electric shock, re and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b)
Do not operate power tools in explosive atmospheres, such as in the presence
of ammable liquids, gases or dust. Power tools create sparks which may ignite
the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodi ed plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
c)
Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
142