Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4. Set temperature
(on some models])
temperature
fabric
medium
casual
low _
high
delicate
heavy
Select temperature
by turning the knob to the desired position
or select the Automatic
Dry Cycle that has the temperature
included in the cycle selections.
NOTE: Not all options and settings are available with all cycles.
5. Select
End of Cycle Signal,
if
desired
D push to start
end of cycle signa_
O
1
off
on
Turn the END OF CYCLE SIGNAL knob to select the desired
setting (On or Off). The End of Cycle Signal produces an
audible sound when the drying cycle is finished. Promptly
removing clothes at the end of the cycle reduces wrinkling.
DRYER CARE
Explosion
Hazard
Keep flammable
materials
and vapors, such as
gasoline, away from dryer.
Place dryer at least 460 mm (18 inches) above the floor
for a garage installation.
Failure to do so can result in death, explosion,
or fire.
g the dryer interior
To clean dryer drum
1. Apply a liquid, nonflammable
household cleaner to the
stained area of the drum and rub with a soft cloth until
stain is removed.
2. Wipe drum thoroughly with a damp cloth.
3o Tumble a load of clean cloths or towels to dry the drum.
NOTE: Garments that contain loose dyes, such as denim
blue jeans or brightly colored cotton items, may discolor the
dryer interior. These stains are not harmful to your dryer and
will not stain future loads of clothes. Dry these items inside
out to avoid drum staining.
6. Press PUSH to START to
begin cycle
[:>pushte start
end of cycle signal
O
1
off
on
g accumulated
lint
From inside the Dryer Cabinet
Lint should be removed every 2 years, or more often,
depending
on dryer usage. Cleaning should be done
by a qualified servicer.
From the Exhaust Vent
Lint should be removed every 2 years, or more often,
depending
on dryer usage.
Push and hold the PUSH TO START knob to begin the cycle.
8
Publicidad
Tabla de contenido
Solución de problemas
