Installing The Optional Accessories - RK Rose+Krieger E 18 Instrucciones De Montaje

7. Working life

7.2.4 Installing the optional accessories

Mechanical limit switch
The technical specifications for limit switches can be found in the catalogue. Ensure that the ca-
bling is safely laid out during installation. Avoid damage to the cabling, for example by having ra-
dii that are too small, as this can lead to failure of the system. The cabling must not be in the path
travelled by the linear unit.
The limit switch is mounted on a clamp on a bracket. The
limit switch can be moved axially on the guidance pipe. The
bracket is secured with the clamping screws of the clamp.
Mechanical limit switch
46