Package Contents; Battery Power - OHAUS Valor 1000W Serie Manual De Instrucciones

TM
OHAUS Valor 1000W Series
2. INSTALLATION

2.1 Package Contents

TM
• Valor 1000W Scale
• Stainless steel Pan
• AC Power Adapter
• Instruction Manual
• Warranty Card
2.2 Location
Use the scale on a firm, steady surface. Avoid locations with excessive air current,
vibrations, heat sources, or rapid temperature changes. Adjust the leveling feet so
the bubble is centered in the circle.
2.3 Power
Connect the AC Adaptor to the AC mains supply. Connect the plug to the DC jack on
the bottom of the scale (see Figure 1-1, item 9). The scale may be operated on the
AC mains supply or the built-in rechargeable battery.

2.3.1 Battery Power

The scale will automatically switch to battery operation if there is a power failure or
the power cord is removed. With AC power, the scale is constantly charging, so the
battery charge indicator (see Figure 1-1, item 1) will remain lit. The scale can be
operated during charging, and the battery is protected against over charging.
Before using the scale for the first time, the battery should be fully
charged for up to 12 hours.
CAUTION: Battery is to be replaced only by an authorized Ohaus service
dealer. Risk of explosion can occur if replaced with the wrong type or
connected improperly. Dispose of the lead acid battery according to
local laws and regulations.
Level Bubble
Figure 2-1. Leveling the Scale.
EN-3
4 x Level Feet