Vat Shift Entries - Sharp XE-A213 Manual De Instrucciones

Manual tax 1-4 system (Manual entry method using preset percentages)
s
This system provides the tax calculation for taxable 1 through 4 subtotals. This calculation is performed using
the corresponding programmed percentages when the
After this calculation, you must finalize the transaction.
Automatic VAT 1 and automatic tax 2-4 system
This system enables the calculation in the combination with automatic VAT 1 and automatic tax 2 through 4. The
combination can be any of VAT1 corresponding to taxable 1 and any of tax 2 through 4 corresponding to taxable
2 through taxable 4 for each item. The tax amount is calculated automatically with the percentages previously
programmed for these taxes.
• The tax status of PLU/subdepartment depends on the tax status of the department which the
PLU/subdepartment belongs to.
• VAT/tax assignment symbol can be printed at the fixed right position near the amount on the
receipt as follows:
When the multiple VAT/tax is assigned to a department or a PLU, a symbol of the lowest number
assigned to VAT/tax rate will be printed. For programming, please refer to "Various Function
Selection Programming 1" (Job code 66) on page 69.
Key operation example
(When the manual
VAT 1-4 system
is selected)

VAT shift entries

This feature is intended to shift the tax status of a particular department (or PLU) programmed for taxable 1 or
taxable 1 and taxable 3.
When the VAT shift entry is made for a particular department or PLU programmed for taxable 1, their tax status
shifts to taxable 2.
When this entry is made for a particular department (or PLU) programmed for taxable 1 and taxable 3, the tax
status "taxable 1" remains unchanged, but the other "taxable 3" is ignored.
D
Press the key to activate the VAT shift prior to entering department(s) or PLU(s) concerned. For programming
the VAT shift operation timing, please refer to "Various Function Selection Programming 1" (Job code 70) on page 72.
Key operation example
(When the manual
VAT 1-4 system
is selected)
42
t
VAT1/tax1
VAT2/tax2
VAT3/tax3
VAT4/tax4
!
1000
s
t
A
D
!
1000
s
t
A
t
key is pressed just after the
A
B
C
D
Receipt print
Receipt print
s
key.