JVC KD-AR7000 Manual De Instrucciones página 38

• Display indications when the
current disc is an audio CD or a CD
Text:
Disc name*
1
* Appear for CD Texts and CDs if it has been
assigned. ("No Name" appears if no name is
recorded or assigned).
2
* Appear only for CD Texts. ("No Name" appears
if no name is recorded).
It is recommended to use the JVC MP3-compatible CD changer with your unit.
• You can also connect the CH-X series CD changers (except CH-X99 and CH-X100).
However, they are not compatible with MP3 discs, so you cannot play back MP3 discs.
• You cannot use the KD-MK series CD changers with this unit.
Before operating your CD changer:
• Refer also to the Instructions supplied with your CD changer.
• You cannot control and play any WMA disc in the CD changer.
• If no discs are in the magazine of the CD changer or the discs are inserted upside down,
"No Disc" will appear. If this happens, remove the magazine and set the discs correctly.
• If no magazine is loaded in the CD changer, "No Magazine" appears. If this happens, insert
the magazine in the CD changer.
38
Track number
1
2
Track name*
• Display indications when the current
disc is an MP3 disc:
Folder number
3
Folder name*
3
* If "ID3 Tag" is set to "On" (see page 34), ID3
tag information will appear on the display.
The album name/performer with
indicator appears on the display instead of the
folder name; while track title with
indicator appears instead of the track name.
("No Name" also appears if no tag is
recorded).
Track number
Track name* 3
(disc)
(track)