What information is shown on the display
The following information are shown commonly for external component operations.
• If you press DISP on the control panel, the display will show the different information or
different screens (see below).
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Changing the display pattern
BACK
DISP
A window (see page 33) is displayed.
Clock time is displayed.
Assigned name (see page 35) appears.
Semi-graphic screen*
Full graphic screen*
(Full graphic screen will be temporarily
changed to the semi-graphic screen when
you operate the unit.)
Goes back to the initial display pattern.
* You can use your edited file for graphic screen
(see pages 26 to 30).
43