Canceling The Display Demonstration - JVC KD-AR7000 Manual De Instrucciones

Ocultar thumbs Ver también para KD-AR7000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

What information is shown on the display
The following information are shown commonly for all sources.
• If you press DISP on the control panel, the display will show the different information or
different screens. (Details about this will be explained later separately for each source.)
Current source
Sound settings alternately appear
(pages 20 to 23).
○ ○ ○ ○ ○ ○ ○ ○ ○

Canceling the display demonstration

When shipped from the factory, display
demonstration has been activated, and starts
automatically when no operations are done for
about 20 seconds.
To cancel the display demonstration, follow
the procedure below:
1
While playing any source...
The Main Menu appears on
MENU
the display.
2
Move the cursor to "PSM" on the Main
Menu.
Current source
information appears with its icon.
• Ex.: Station name assigned/Frequency
3
BAND
4
To exit from the Menu operation, press
MENU again.
To activate the display demonstration, repeat
the same procedure and select any one other
than "Off" in step 4 .
• For more details, see "To show the display
demonstration—Demo/Link" on page 33.
Cursor
Enter the PSM Menu.
OK
• If "Demo/Link" does not appear, press 5/
∞ repeatedly until it appears.
Select "Off."
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Kd-shx700

Tabla de contenido