Installing The Power Adapter; Connect The Electrodes; Power Supply - OHAUS STARTER 3100M Manual De Instrucciones

STARTER 3100M Bench Meter
2.3

Installing the power adapter

Insert the right adapter clip into the power adapter slot. The Ohaus balance power supply is also
12V which could also be used for the pH meter.
2.4

Connect the electrodes

There are several sockets for ST3100M.
"BNC" socket for pH electrode,
"TEMP." Socket (Cinch) for temperature electrode,
"Min-Din" Socket for conductivity electrode,
"Data" socket can connect printer through a connect cable (RS232 Interface, Scout ; from the
mini-din to RS232, item NO 30268982) which is included in the kits.
Temp
pH/BNC
Cond.

Power supply

Data
EN 7
-