Installing The Stand-Alone Electrode Holder; Installing The Power Adapter - OHAUS STARTER 3100 Manual De Instrucciones

EN 6
-
2.2

Installing the stand-alone electrode holder

Install the electrode arm on the base,
After adjusting the tension knob to some extent, you can move the upper arm up and down.
When the pH electrode is installed on the arm, the storage bottle of pH electrode fits into the
base hole.
2.3

Installing the power adapter

Insert the right adapter clip into the power adapter slot. The Ohaus balance power supply is also
12V which could also be used for the pH meter.
STARTER 3100 Bench pH Meter