Technical Characteristics; Foreseen Use; General Instructions - BIANCHI VENDING lei500 M Manual De Uso

1.0

TECHNICAL CHARACTERISTICS

Height (A)
Width (B)
Depth (C)
Weight
Power Supply
Power frequency
Water supply
AVERAGE CONSUMPTIONS:
Water supply connection
Electrical supply connec.
The electrical characteristics of the models are outlined on the rating plates
inside the vending machines.
PRODUCT CONTAINER CAPACITY
Coffee in beans
Instant coffee
Milk
Chocolate
Tea
Frozen-dry tea
Broth
Sugar
Caps N°
Spoons N°
The electrical characteristics of the models are outlined on the
rating plates inside the vending machines.
KNOWING THE DISTRIBUTOR
Lei 500 M-L espresso (Fig.1.2)
1 Coffee group and grinder
2 Drink dispensing group
3 Sugar dispenser group
4 Payment system
5 Cup column
6 Spoons column
7 Service button
8 Washing button
9 Dispensing hatch
10 Water bin
11 Dispensing chamber
12 Electronics board CPU
13 Switching
14 Power card
15 Expansion board
1.1

Foreseen use

The automatic distributor is exclusively for the dispensing of drinks, pre-
pared mixing food substances with water (by infusion as far as concerns
espresso coffee).
For this purpose use products declared as suitable by the manufacturer for
automatic distribution in open containers. The drinks are made in specific
plastic cups automatically dispensed by the machine. Where foreseen, also
the spoon for mixing the sugar is dispensed.
The drinks must be consumed immediately and in no case are to be kept for
subsequent consumption.
Instructions
for the user
LEI 500 M LEI 500 L
1630 mm 1830 mm
665 mm 665 mm
775 mm 775 mm
190 kg 205 kg
220 – 230 V
50 Hz – 60 Hz
0,05 ÷ 0,65 MPa (0,5 ÷ 6,5 bar)
3/8" gas
Schuko plug
Lei500 M Lei500 L
Kg 3,5 Kg 4,5
Kg 1,0 Kg 1,4
Kg 1,7 Kg 2,2
Kg 3,6 Kg 4,8
Kg 3,3 Kg 5,2
Kg 2,4 Kg 2,4
Kg 3,6 Kg 3,8
Kg 5,5 Kg 5,5
500 700
400 540
Lei 500 M-L Instant (Fig.1.3)
1 Drink dispensing group
2 Payment system
3 Cup column
4 Service button
5 Washing button
6 Dispensing hatch
7 Water bin
8 Dispensing chamber
9 Electronics board CPU
10 Switching
11 Power card
12 Expansion board
2.0 PREMISE
2.1 - Important notices for operator
This automatic distributor has been designed and constructed in full accor-
dance with current safety regulations and is therefore safe for those who
follow the ordinary filling and cleaning instructions as indicated in this manual.
The user must not under any circumstances remove the guards that
require a tool for removal.
Some maintenance operations (to be done solely by specialized technicians
and indicated in this manual with a special symbol) require that specific
safety protections of the machine must be switched off .
In accordance with the current safety regulations, certain operations are
the exclusive responsibility of the installation technician, and the ordinary
maintenance technician may have access to specific operations on with
specific authorization.
The acquaintance and absolute respect, from a technical point of view, of
the safety instructions and of the danger notices contained in this manual,
are fundamental for the execution, in conditions of minimum risk, for the
installation, use and maintenance of this machine.
2.2

General Instructions

Knowledge of the information and instructions contained in the
present manual is essential for a correct use of the automatic
vending machine on the part of the user .
– Interventions by the user on the automatic vending machine are allowed
only if they are of his competence and if he has been duly trained.
The installation technician must be fully acquainted with all the mecha-
nisms necessary for the correct operation of the machine.
– It is the buyer's responsibility to ascertain that the users have been trained
and are informed and regulations indicated in the technical documentation
supplied.
Despite the full observance of the safety regulations by the constructor,
those who operate on the automatic dispensers must be fully aware of
the potential risks involved in operations on the machine.
– This manual is an integral part of the equipment and as such must always
remain inside of the same, so as to allow further consultations on the
part of the various operators, until the dismantlement and/or scrapping
of the machine.
– In case of loss or damage of the present manual it is possible receive a
new copy making application to the manufacturer, with prior indication
of the data registered on machines' serial number.
– The functional reliability and
guaranteed only if original parts are used.
– Modifications to the machine not previously agreed on with the construction
company and undertaken by the installation technician and/or manager,
are considered to be under his entire responsibility.
All the operations necessary to maintain the machine's efficiency, before
and during it's use are at the users charge.
– Any manipulations or modifications made to the machine that are not
previously authorized by the manufacturer, relieve the latter from any
responsibility for damages deriving from, and will automatically result
in the cancellation of the machine guarantee terms.
– This manual reflects the status at the moment of the emission of the
automatic vending machine on the market; possible modifications,
upgrading, adaptments that are done the machine and that are subse-
quently commercialized do not oblige BIANCHI VENDING Spa neither
to intervene on the machine previously supplied, nor, neither to update
the relative technical documentation supplied together with the machine.
– It is however BIANCHI VENDING's faculty, when deemed opportune
and for valid motives, to adjourn the manuals already present on the
market, sending to their customers adjournment sheets that must be
kept in the original manual.
Possible technical problems that could occur are easily resolvable consulting
this manual ; For further information, contact the distributor from whom
the machine has been purchased, or contact Bianchi Vending's Technical
Service at the following numbers:
 +039. 035.45.02.111 - fax +039. 035.883.304
15
ENGLISH
optimization of machine's services are