Specifications - Aiwa CSD-EL300 Manual De Instrucciones

SPECIFICATIONS

FM tuner section
Tuning range 87.5 MHz to 108 MHz
Antenna Rod antenna
AM tuner section
Tuning range 530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
Antenna Ferrite bar antenna
Cassette deck section
Track format 4 tracks, 2 channels stereo
Frequency response Normal tape: 50 Hz – 12500 Hz
Recording system AC bias
Recording/playback head × 1,
Heads
Erasure head × 1
Compact disc player section
Laser Semiconductor laser (λ = 780 nm)
D-A converter 1 bit dual
General
100 mm cone type × 2
Speakers
2.5 W + 2.5 W (10% T.H.D./7 Ω
Power output
DC)
Output PHONES (stereo minijack)
Power requirements DC 12 V using eight size C (R14)
batteries
120 V AC, 60 Hz
Power consumption 20 W
Dimensions of main unit (W × H × D)
440 × 165 × 225 mm
(17
Weight of main unit 3.8 kg (8 lb 6 oz.)
not including batteries
Accessories AC cord (1)
Remote control (1)
• Specifications and external appearance are subject to
change without notice.
× 6 × 8
3 / 1 / 7 / in.)
8 2 8
COPYRIGHT
Please check the laws on copyright relating to recordings
from discs, radio or external tapes for the country in which
the machine is being used.
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for
help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's
right or authority to operate this product.
En
E
F
15
ENGLISH