Olympus PER-E01 Manual De Instrucciones página 13

Align the threaded section of the PER-E01 with the port mount thread on the PT-E series case.
Hold the PT-E series case firmly with one hand, hold the main body of the PER-E01 with your other hand
and screw it into the PT-E series by turning the PER-E01 clockwise.
Resistance increases as the PER- E01 is screwed in more deeply. However, be sure to screw it in all the
way until there is no gap visible below the threaded section of the PER-E01.
Align the threaded section of the PER-01 with the port mount thread on the PPO-E series lens port.
Hold the PT-E series case and PER-E01 firmly with one hand, hold the main body of the PPO-E series
lens port with other hand and turn it clockwise to screw it into the PER-E01.
Resistance will increase as the PPO-E series lens port is screwed in However, be sure to screw it in all the
way until there is no gap visible between the PER-E01's threaded section and the PPO-E's port mount thread.
E-3
Screw in until
there is no gap.
Screw in until
there is no gap.