Name Of Parts - Olympus PER-E01 Manual De Instrucciones

1

Name of Parts

PER-E01 main body
Silicon O-ring (POL-E101)
Front cap
Rear cap
PT-E series waterproof case mount
Grease for silicone O-ring
Pick for O-ring removal
Waterproof lens port mount
* This product has been designed for exclusive use with the following rear converter. It cannot be used in
combination with any other rear converter.
Corresponding rear converter
2 Mounting the PER-E01 between the Waterproof Case and the Waterproof Lens Port
Threaded section
PPO-E series
waterproof lens port
This product is designed to be mounted between the PT-E series waterproof case and the PPO-E series
waterproof lens port.
Before mounting, first make sure that no foreign matter is attached, then apply a thin layer of the provided
silicone O-ring grease to the O-rings, the port mount thread on the PT-E series case, the threaded section of
the PPO-E series lens port or the O-ring contact surfaces.
ZUIKO DIGITAL 1.4X TELECONVERTER EC-14
Grease applying surface on O-rings
O-ring
Threaded section
O-ring
PER-E01
O-ring contact surfaces
of waterproof lens port
E-2
O-ring contact surfaces
Port mount thread
PT-E series
waterproof case