Run-On Function; Locking Mechanism; Ventilation Moulding - Gaggenau VL 414 111 Instrucciones De Uso

Run-on function

Ideal for subsequently ventilating the kitchen area.
The run-on function can only be used in level 2.
1 Open the locking mechanisms.
Note: To switch the fan on, at least one locking
mechanism must be open.
2 Press in the control knob and turn the control
knob anti-clockwise to the run-on function ž.
The illuminated ring behind the control knob
flashes.
The run-on time is ten minutes. Once this time has
elapsed, the ventilation system switches off
automatically.

Locking mechanism

m
Risk of burns!
The appliance becomes hot during operation. Only
touch the locking mechanism in the marked area.
The ventilation elements can be opened and closed
independently of each other. Open the locking
mechanisms where you are cooking.
Note: To switch the fan on, at least one locking
mechanism must be open.
Opening the locking mechanism
Press on the marked area " on the locking
1
mechanism.
The locking mechanism is unlocked.
2 Swivel the locking mechanism anti-clockwise and
press it downwards until it snaps into place.
Closing the locking mechanism
Press on the marked area " on the locking
1
mechanism.
The locking mechanism is unlocked.
2 Swivel the locking mechanism clockwise and
press it downwards until it snaps into [place.

Ventilation moulding

If the downdraft ventilation operates beside a gas-
fired appliance, a ventilation moulding AA 414 010
must be attached when cooking. The ventilation
moulding improves the extraction behaviour for gas-
fired appliances. The ventilation moulding prevents
small flames from going out as a result of a draft.
9