Citizen CT-S281 Manual De Usuario página 14

Operation Panel
● POWER LED
Lights when the printer power is on and goes off when the printer power is
off. May blink or light in a special mode or in case of a failure.
● FEED button
Pressing this button once causes a paper feed of one line. Pressing the button
continuously causes the paper to feed continuously.
● ERROR LED
Lights or blinks when paper is empty or in case of a failure.
The interval length of blinking shows the type of error.
● PAPER LED
Lights when there is no paper or the paper is low with the optional PNE sensor.
Rear Connectors
Serial interface Type
Sensor adjuster
cover
● Power connector
Connects to the cable from AC adapter.
● USB Interface connector
Connects to the USB interface cable.
● Serial interface connector
Connects to the serial interface cable.
● Sensor adjuster cover
When adjusting the Paper sensor, remove this cover.
POWER LED FEED button
POWER
Power connector
Sensor adjuster
Serial interface
cover
connector
— 11 —
ERROR LED
PAPER LED
ERROR
FEED
PAPER
USB interface Type
Power connector
USB Interface
connector