Citizen CT-S281 Manual De Usuario página 31

Ocultar thumbs Ver también para CT-S281:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Switch No.
Memory SW5-1
Reserved
SW5-2
Reserved
SW5-3
USB Mode
SW5-4
Reserved
SW5-5
Reserved
SW5-6*9 Auto Back Feed
SW5-7
Clear PNE LED
SW5-8
Reserved
Switch No.
Memory SW7-1*8 Baud Rate
SW7-2
Data Length
SW7-3
SW7-4
SW7-5
Flow Control
SW7-6
Reserved
SW7-7
VCom Protocol
Memory SW8-1
Reserved
SW8-2
Paper Type
Memory SW9-1
Code Page
Memory SW9-2
Int' char Set
Memory SW9-3
SW9-4
JIS/Shift JIS
Memory SW10-1 Print Density
SW10-2 Print Speed
SW10-3
Reserved
SW10-4
Reserved
*1: When paper length setting is assigned as a command, use the command (GS1) when
specifying paper layout. If there is no specification, paper length is set to default value. This
is valid only when Blackmark paper/Label paper is selected with memory switch 4-4.
*2: Only valid when Blackmark paper/Label paper is selected with memory switch 4-4.
*3: No cutting operation occurs when cutter is disabled with memory switch 2-2.
When thermal paper roll is selected, cutting operation occurs after paper is fed by about
24mm.
When Blackmark paper/Label paper is selected, cutting operation occurs after paper feed to
the top of the next print position.
*4: Paper select setting at the time of shipment depends on the model.
Standard: OFF (Thermal paper roll) Label: ON (Blackmark paper/Label paper)
*5: Valid only when Blackmark paper/Label paper is selected with memory switch 4-4.
Factory setting of paper position detection is subject to the model.
Standard: OFF (Blackmark detection) Label: ON (Label detection)
*6: MSW4-6/4-7 functions only when blackmark paper/label paper is selected by MSW4-4.
*7: Invalid when Blackmark paper/Label paper is selected with memory switch 4-4. (Only for full
cut)
*8: Memory switch SW7-x setting is valid only when DIP switch No. 1 is OFF.
*9: Only valid when Blackmark paper/Label paper is selected with memory switch 4-4, and Label is
selected with memory switch 4-5.
Setting
Setting
Default
9600 bps
8bits
Stop Bit
1bit
Parity
NONE
DTR/DSR
PC Setting
1 Color Normal 1 Color Normal, 2 Color Normal
PC437
U.S.A
Kanji
OFF
JIS
100%
Level 9
0 (OFF)
Fixed
Virtual COM
Fixed
Fixed
After Cut
Auto
Fixed
1200 bps, 2400 bps, 4800 bps, 9600 bps,
19200 bps, 38400 bps
7bits, 8bits
1bit, 2bits
NONE, EVEN, ODD
DTR/DSR, XON/XOFF
PC Setting, DTR/DSR, XON/XOFF
PC437/Katakana/PC850,858/PC860/PC863/
PC865/PC852/PC866/PC857/WPC1252/
Space page/PC864/Thai Code 18
U.S.A, France, Germany, England, Denmark,
Sweden, Italy, Spain, Japan, Norway,
Denmark 2, Spain 2, Latin America, Korea,
Croatia, China
ON, OFF
JIS, Shift JIS
70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%,
110%, 115%, 120%, 125%, 130%, 135%, 140%
Level 1, Level 2, Level 3, Level 4, Level 5,
Level 6, Level 7, Level 8, Level 9
— 28 —
1 (ON)
Fixed
Printer Class
Before Print
Set Paper
Set Values

Publicidad

Tabla de contenido
loading

Tabla de contenido