Electrical Connection - Faber AGORÀ Manual De Instrucciones

RECIRCULATION VERSION AIR OUTLET
• Cut a hole ø 125 mm in any shelf that may be positioned
over the hood.
• Insert the reducer flange 9 on the hood body outlet.
• Connect the flange to the outlet on the shelf over the hood
by using a flexible or rigid pipe ø120 mm.
• Fix the pipe in position using sufficient pipe clamps (not
supplied).
• Fix the air outlet grid 8 on the recirculation air outlet by
using the 2 screws 12e (2,9 x 9,5) provided.
• Ensure that the activated charcoal filters have been in-
serted.

ELECTRICAL CONNECTION

• Connect the hood to the mains through a two-pole switch
having a contact gap of at least 3 mm.
• Remove the grease filters (see paragraph Maintenance) be-
ing sure that the connector of the feeding cable is correctly
inserted in the socket placed on the side of the fan.
EN
12e
8
ø 125
9
1
10