3. PREPARE CUSTOM HOOD
When building a custom hood, always follow all applicable construction codes and standards. The custom hood
must be positively secured to wall studs or other wooden framework behind the drywall. Make sure it is capable of
supporting its own weight and the weight of the power pack. Failure to do so may cause personal injury or damage
to countertop or cooktop.
The custom hood must be constructed to fit the shape and total weight of the CC6 series power pack
model. The recommended minimum thickness for the custom hood base is 5/8" . If an optional custom
hood liner will be installed, we recommend the sides and front of the custom hood to be 3/4" thick. If
the optional custom hood liner will not be installed, the custom hood sides and front thickness are at
the installer's discretion. See chart and illustration for details.
CC65I28SB
S
B
P
P
INGLE
LOWER
OWER
ACK
CC67I28SB
D
B
P
P
UAL
LOWER
OWER
ACK
NOTE: The dual blower model has the
same dimensions as the single
blower model, but does not have a
horizontal discharge.
WARNING
!
HK0292A
HK0291A
5
P
T
OWER PACK MODEL
OTAL WEIGHT
CC65I28SB
33
LB
CC67I28SB
45
LB
.
.