Ac Voltage Measurement - HT 60 Manual De Instrucciones

4.3.2. AC Voltage measurement

The maximum input AC voltage is 600V. Do not measure voltages
exceeding the limits given in this manual. Exceeding voltage limits could
result in electrical shocks to the user and damage to the instrument.
Fig. 3: Use of the instrument for AC voltage measurement
1. Select position VHz%. The symbol
2. Insert the red cable into input terminal VHz%CAPTemp 
into input terminal COM.
3. Position the test leads in the desired spots of the circuit to be measured (see Fig. 3).
The display shows the value of voltage.
4. The message
measurable value.
5. Press the Hz% key until symbols
of frequency and duty cycle associated to the value of AC voltage.
6. To use the HOLD function and Relative measurement, see § 4.2
O.L. indicates that the value of AC voltage exceeds the maximum
" "
CAUTION
AC is shown on the display.
" "
Hz or % are shown in order to activate the display
" " " "
EN - 9
HT60
and the black cable