asalvo 360-FIX Manual De Instrucciones página 21

4
Make the isofiX connectors face
the isofiX anchorage system
between the seat and the backrest
of the vehicle seat. (fig. 10)
5
click the child seat isofiX connectors
into the isofiX anchorage system.
When clicking in, the indicators
informing you about the correct
installation, should be green and your
child restraint's backrest is aligned
parallel (fig. 11) with the backrest of
the vehicle seat.
! Make sure that both isofiX
connectors are securely attached to
their isofiX anchor points. the colors
of the indicators on the both isofiX
connectors should be completely
green. (fig. 11)
! check to make sure the base is
securely installed by pulling on the
both isofiX connectors.
6
the completely assembled base
is shown as fig. 12
! the isofiX connectors must
be attached and locked onto the
isofiX anchor points. (fig. 12.1)
! the support leg must be
installed correctly with green
indicator. (fig. 12.2)
11
1
12
1
INSTRUCTIONS
2
EN