EN
INSTRUCTIONS
3
if necessary, place the small child inner pads in the child restraint and
thread the shoulder harnesses, waist harnesses
4
leave the harnesses on
the left side and right side
respectively.(fig. 17)
5
Place the child into the child
restraint and pass both arms
through the harnesses. (fig. 18)
! after the child is seated,
recheck whether the shoulder
harnesses are at the proper
height.
6
engage the buckle. (fig. 19)
7
Pull down the adjustment webbing and adjust it to the proper length to
make sure your child is snugly secured. (fig. 20)
! Make sure the space between the child and the shoulder harness is
about the thickness of one hand.
19
20
17
18