Measuring Times With Handicap; Using The Chronograph As A Counter - BREIL 3S10 Manual De Instrucciones

F

MEASURING TIMES WITH HANDICAP

The watch can be used to time events by attributing handicaps or fixed time
supplements (up to a maximum of 59 seconds and 98 hundredths).
Proceed as follows:
• Pull the crown out to the second stop (position 2).
Repeatedly press buttons
hand to reach the required supplementary time.
• Push the crown back to its original position(0)
When the timing is finished, remember to reset the chronograph hands back to their
original position "0" in order to prevent future incorrect measurements
USING THE CHRONOGRAPH
G
AS A COUNTER
The 1/50th second hand can be used as a numerical counter (e.g. counting the number
of completed track circuits) while the watch is registering normal time.
Press button
•
progressively displayed.
After using the counter, return the hand to "0" by pressing button
•
6
and
for each count (maximum 50). The numerical total is
to advance the second hand and 1/50th second
twice.