Timer Function - HJM 641 Instrucciones De Uso

3) 24H TIMER FUNCTION
1. Open the appliance as working conditions,(fan, warm, hot are all
ok).Control panel "TIMER" button and remote control "24H" button
are same operate way.
2. Press "TIMER" button ,set the timer up to 24 hours, keep press
"TIMER" button
close,01=1hour,02=2 hours...24=24 hours etc.) and the "TIMER"
light is on.
PS:set as "00" means no set timer ,the "TIMER" light is off.
4) THERMOSTAT INSTRUCTIONS
1. Open the appliance as working conditions,(fan, warm, hot are all
ok).This function only through by Remote control.
2. To adjust temperature, press the "+ , 1" to set the desired.
temperature and the temperature set from 10℃ to 49℃.
3. When the air temperature drops 2 degree below the set
temperature, the heater will start heating with "I/W"(1000W).
4. When the air temperature drops 4 degree below the set.
temperature, the heater will start heating with" II/H"(2000W).
5. When the air temperature high 1 degree or ≤ the set temperature,
the heater will blow the cold air .
5) WEEK TIMER FUNCTION
1. Open the appliance as working conditions,(fan, warm, hot are all
ok).This function only through by Remote control
2. WEEK Press ""button 1st time, "I/W" and "W-Timer" are lights on,
show "1"means "Monday".
HOUR Press "W-TIMER" button 2nd times, "II/H" lights on, "+ , 1"
two buttons set the Hours from 01--00(01= 1 o'clock,02= 2
o'clock...00=24 o'clock etc.)
MINUTE Press "W-TIMER" button 3rd times ,"VENT./MIN." lights on,
"+ , -" two buttons set the Minutes from 00--59(01= 1 Minute,02= 2
Minute etc.)
---------------------------------------------------------This is open time
HOUR Press "W-TIMER" button 4th times, "II/H" lights on, "+ , 1"
two buttons set the Hours from 01--00(01= 1 o'clock,02= 2
o'clock...00=24 o'clock etc.)
Página 2
to increase the
- 27 -
7
hours from 00--24(00=
E
N
G
L
I
S
H