HJM 641 Instrucciones De Uso página 28

MINUTE Press "W-TIMER" button 5th times ,"VENT./MIN." lights on, "+,
- "two buttons set the Minutes from 00--59(01=1 Minute,02=2 Minute
etc.)
---------------------------------------------------------This is close time
The above are finished set Monday Timer.
3.
Press "W-TIMER" button once more ,"I/W" lights on, show
"2"means "Tuesday" .Please noted that the operate with open
time HOUR/MINUTE and close time HOUR/MINUTE are all
same as before Monday.
4.
From 1-7(1= Monday,2= Tuesday...7= Sunday etc.) are all set
finished, press "RETARD" button on remote control 7th times to
set from Monday to Sunday's temperature and press"+ , -" two
buttons, select the temperature which you need, the temperature
range from 10℃ to 49℃.
PS:In Week timer function, when you set today's temperature, the
thermostat function will start, the rules same as 4) THERMOSTAT
INSTRUCTIONS, please noted.
You can set different open time , closed time and temperature
within whole week.
6) WINDOW OPEN FUNCTION
1. Open the appliance as working conditions,(fan, warm, hot are all
ok).This function only through by Remote control.
2. Press "AUTO" button, the "AUTO" light is on. The appliance is
working as smart saving energy models.(In this function, the
appliance is check and record environment temperature in
immediately It will stop working, when the appliance check the
environment are drop ≧3 ℃. The user should restart the
appliance with "ON/OFF" button)
3. Press "AUTO" button again, the "AUTO" light is off. Window Open
Function is closed.
7) DELAY FUNCTION
1. This function can be use should be fit two points :
• the appliance is in the standby state.
• before the appliance working.
Página 28
- 28 -
E
N
G
L
I
S
H