Overheat Protection - HJM 641 Instrucciones De Uso

REMOTE CONTROL VIEW:
1. Remote control, please use Lithium battery CR2025 3V.
2. The remote control power button is labelled as such.

OVERHEAT PROTECTION

This heater is protected with an overheat protection that switches off the
appliance automatically in case of overheating. For example: due to the
total or partial obstruction of the vents. In this case, unplug the
appliance, wait about 30 seconds for it to cool and remove the object
which is obstructing the vents. Then switch it back on as described
above. The appliance should now operate normally. If the problem
persists, please contact Customer Service for assistance.
Página 30
1. "ON/OFF" Main power button
2. "24H" Setting timer from 1-24 hours
3. "MODO" COLD,WARM,HOT 3 setting for
selection
4. "BLOQ." Child-Lock function for heater
5. "AUTO" Window Open Function
6. "RETARD." Set the open and closed time
of heater
7. "W.Timer" Set the timer of one week.
8. "+" Increase
9. "-" Decrease
10. "Set" Set real time
- 30 -
E
N
G
L
I
S
H