RK Rose+Krieger PLC-PC Instrucciones De Montaje página 35

7.3.4 Connecting a PLC controller
To connect a PLC controller, the PLC/PC data interface inputs are connected with the PLC con-
troller outputs and the PLC/PC data interface outputs are connected with the PLC controller in-
puts in accordance with the following instructions.
Hand switch
Easylift
hand switch
F key
key down
key 2
key 4
Screw terminal strip occupancy
The illustration shows the rear of the appliance.
Note the pin occupancy.
1 1 2 . 3
RK EASYLIFT
key up
F
key 1
1
key 3
2
3
key 5
4 5
Powerlift
hand switch
F key
key down
key 1
terminal 1
7. Working life
key up
key 3
key 2
terminal 16
35