RK Rose+Krieger PLC-PC Instrucciones De Montaje página 41

Procedure:
•
Open the rear of the housing. To do this, remove
both screws and take off the cover.
•
Enable the QuickStop function by moving the DIP
switch SX6 to the "QuickStop active" position.
The QuickStop function is now switched on.
To disable this function, replace the DIP switch in its original
position.
7. Working life
5 V Quick stop
24 V Quick stop
Quick stop inactive
SX6
Quick stop active
SX2
4 Bit SPS
8 Bit SPS
SX4
41