Safety Label; Purpose Of This Manual; Control Panel (Leds And Buttons) - Epson TM-J7000 Manual Del Usuario

English

Safety Label

WARNING:
Do not connect a telephone line to the drawer kick out connector or to
the display module connector; otherwise, the printer and the telephone
line may be damaged.

Purpose of This Manual

This manual provides information to operators of the TM-J7000/
J7100 to describe basic operations to enable safe and correct use of
the printer.
Shipping
To ship this printer, follow these steps:
1. Remove the roll paper and ink cartridge.
2. Turn off the power supply.
3. Check that the POWER LED is off.
4. Remove the power supply connector and other connectors.
Keep the printer upright and horizontal while you pack it.
Unpacking
The following items are included for the standard specification
printer. If any item is damaged, contact your dealer.
❏
Printer
❏
Roll paper
❏
Ink cartridge
❏
Hexagonal millimeter screws (only for the serial interface
printer) (2)
❏
Power switch cover
❏
Instruction sheets
Peel away the 3 pieces of tape on the printer and remove the spacer
from the slip paper path after unpacking.

Control Panel (LEDs and Buttons)

See illustration B.
4 TM-J7000/J7100 User's Manual