Saunier Duval 3-AW Manual De Usuario página 83

6- INDICATORS ON THE DISPLAY OF REMOTE CONTROL
CLOCK button
Readjusting the clock
NOTE
Setting of the clock must be completed before the AUTO-TIMER function is started. If the time is
adjusted, after a setting of the AUTO-ON/OFF timer has been performed, the remote control will
send the adjusted timer settings to the indoor unit.
The clock accuracy is 15 seconds per day.
WARNING
Static electricity or other events which cause extremely high voltage may result in the initialization
of the clock in the remote control (flashing "0:00"). If it happens that the clock is initialized,
adjust the clock time before you start to operate the unit.
After the time indicator reached the desired time,
press the CLOCK button or release button
and wait for 5 seconds.
The time indicator stops flashing and the clock starts
to operate.
Press the CLOCK button on the remote control for
approx. 3 seconds. The colon in the time indicator
starts flashing.
To change the current time, follow the above ins-
tructions in section "Initial setting of the clock" and
"CLOCK button".
11
5 6
or