Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1

7- QUICK START

7.1- INSERTING THE REMOTE CONTROL BATTERIES
NOTE
Ensure only new batteries are used. If the unit is not being used for a long period of time, remove the batte-
ries.
7.2- REPLACING THE REMOTE CONTROL BATTERIES
NOTE
Ensure only new batteries are used.
If batteries are removed from the remote control they must be segregated from the household waste and dispo-
sed according to the local requirements.
Two alkaline dry batteries (R03/LR03 x 2) are required for the remote
control.
Press on the arrow mark of the battery cover on the rear of the remote
control and slide open the cover in the direction of the arrow.
Insert two batteries and ensure the + and – contacts are in the correct
positions.
Replace the cover by sliding upwards until it clicks into place.
If the display of the remote control is not working, the remote control
batteries require replacing.
Two alkaline dry batteries (R03/LR03 x 2) are required for the remote
control.
Slide open the battery cover on the rear of the remote control according
to the arrow direction.
Insert two batteries and ensure the + and – contacts are in the correct
positions.
Replace the cover by sliding upwards until it clicks into place.
After replacing the batteries, set the clock to the current time at the
remote control.
18

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

3-ak2-ak

Tabla de contenido