Alarms - Soler & Palau ADVANZ Instrucciones De Uso

Configuring the hour
- turn the knob until the hours item is selected: it will be bright against a dark background
- press the knob: the currently configured hour will flash
- turn the knob to configure the hour desired
- press the knob to confirm the configuration: the hour will be displayed as a bright writing against a
dark background.
Configuring the minutes
- turn the knob until the minutes item is selected: it will be bright against a dark background
- press the knob: the minutes will flash
- turn the knob to configure the minutes desired
- press the knob to confirm the configuration: the minutes will be displayed as a bright writing against
a dark background.
Returning to the menu window
The menu window is accessed through the "close" icon:
- turn the knob until the icon is selected. The icon will become bright against a dark background
- Press the knob to confirm your selection: the menu window will be displayed
A
LARMS
In case of alarms, additional details on the cause of the problem can be obtained by opening the specific
window. The alarm window is accessed by selecting the alarm item in the selection menu.
Selecting the unit (in case of several machines only)
- turn the knob until you select the unit whose alarms you want to know: a bright writing against a
dark background will be displayed
- press the knob to confirm your selection: the corresponding alarm windows will be displayed
Menu / Alarm
Communication:
Ok indicates good operation of the communication between the card in the machine
and the control panel, while ko indicates communication failure. See installation.
Te (external):
Ok indicates good operation of the external air temperature sensor, while ko indicates
sensor failure.
Tr (return):
Ok indicates good operation of the return air temperature sensor, while ko indicates sensor
failure.