Bluetooth ® Playback; Playing Back - Onkyo CR-N775D Serie Manual De Instrucciones

> Before Start > Part Names
BLUETOOTH
1
2
Onkyo CR-N775D
3
26
> Install
®
Playback
Pairing
Perform the following procedure when the unit is on.
1. When you press the
controller, "Now Pairing..." is displayed on the
display, and the pairing mode is enabled.
2. Enable (turn on) the BLUETOOTH function of the
BLUETOOTH wireless technology enabled device,
then select this unit from amongst the devices
displayed. If a password is requested, enter "0000".
0 This unit is displayed as "Onkyo CR-N775D
XXXXXX".
3. "Now Pairing..." on the display changes to the name
of the BLUETOOTH wireless technology enabled
device.
0 To connect another BLUETOOTH wireless
technology enabled device, press and hold the
button until "Now Pairing..." is displayed, then
perform step 2 above. This unit can store the data of
up to eight paired devices.
0 The coverage area is within about 32y/10 m. Note
that connection is not always guaranteed with all
BLUETOOTH wireless technology enabled devices.

Playing Back

Perform the following procedure when the unit is on.
1. Perform the connection procedure on the
BLUETOOTH wireless technology enabled device.
> Initial Setup > Playback
button on the remote
Asb
BLUETOOTH
Now Pairing...
--:--:-- / --:--:--
Supplementary information | Advanced Setup | Others
2. The input selector on this unit automatically switches
to BLUETOOTH.
3. Play the music files. Increase the volume of the
BLUETOOTH wireless technology enabled device to
an appropriate level.
0 Due to the characteristics of BLUETOOTH wireless
technology, the sound produced on this unit may
slightly be behind the sound played on the
BLUETOOTH wireless technology enabled device.