Entering Text, Adjusting Sound Quality, Etc - Onkyo CR-N775D Serie Manual De Instrucciones

> Before Start > Part Names

Entering text, adjusting sound quality, etc.

Entering text
Text entry, for passwords, etc., uses the following
procedure.
Password
A/a
Hide/Show
MEMORY
1. Select a character or symbol with the cursors (a) and
press ENTER (b). Repeat this to enter text.
"A/a": Switches between upper and lower cases.
"<" ">": Moves the cursor to the arrow direction.
" ": Removes a character on the left of the cursor.
" ": Enters a space.
0 To select whether to mask the password with "¢"
or display it in plain text, press MEMORY (e) on
the remote controller.
2. After inputting, select "OK" with the cursors (a) and
press ENTER (b).
Adjusting the sound quality
Adjusting the bass (Bass)
1. Press TONE button (c).
2. Press 3/4 buttons (a) to adjust the bass. (s6 to
i6)
Adjusting the treble (Treble)
1. Press TONE button (c) twice.
2. Press 3/4 buttons (a) to adjust the treble. (s6 to
i6)
36
> Install
Emphasizing the low range (PM.Bass)
1. Press TONE button (c) three times.
2. Press 3/4 buttons (a) to select "On" and press
ENTER (b).
Reproduce the original sound faithfully
(DIRECT mode)
Processing that affects sound quality is shut down so
sound closer to the original is reproduced.
OK
1. Press DIRECT (d).
2. Press 3/4 buttons (a) to select "On" and press
ENTER (b).
0 When the DIRECT mode is on, Bass, Treble, and
PM.Bass are disabled.
e
> Initial Setup > Playback
a
b
c
d
Supplementary information | Advanced Setup | Others