Playing Audio From An External Device - Onkyo CR-N775D Serie Manual De Instrucciones

> Before Start > Part Names

Playing audio from an external device

1
a Digital Optical Cable, b Digital Coaxial Cable, c Analog Audio Cable
28
> Install
2
a
b
c
> Initial Setup > Playback
Supplementary information | Advanced Setup | Others
Connections
You can play the audio from external devices such as
TVs and game consoles through this unit. If the
external device has an optical digital output jack or
coaxial digital jack, connect using a digital optical cable
or digital coaxial cable to the DIGITAL IN OPTICAL/
COAXIAL jacks on this unit. When the external device
is to be connected with an analog audio cable, connect
to the LINE IN jacks on this unit.
Playing Back
Perform the following procedure when the unit is on.
1. When playing a device connected to the DIGITAL IN
OPTICAL terminal, press INPUT 2/1 repeatedly to
change the input on this unit to "OPTICAL".
Asb
OPTICAL
44.1kHz