Teac TASCAM CD-A630 Manual Del Usuario página 21

G CD PITCH CONTROL knob
H CD PITCH CONTROL On/Off button
When pitch control is on, the CD PITCH
CONTROL knob is active.
Press this button in the stop mode to turn
the pitch control on and off.
I SKIP buttons
Press these buttons to skip tracks.
Hold down these buttons to search for a
part of a track.
J PROGRAM button
Use this button to turn the program mode
on and off.
K REPEAT MODE button
Use this button to change the repeat
mode.
L Disc trays
There are three disc trays.
Never place more than one disc on a
tray.
M Open/Close buttons (1, 2, 3)
Use these buttons to open and close the
disc trays.
Remote Control Unit (CD)
N REPEAT A-B button
This button is used for A-B repeat
function.
O SINGLE button
After playback of the selected track, the
unit stops.
d e
a
b c
j k l m n
h i
P TIME button
Use this button to change the display
during CD playback.
Q INTRO button
Use this button for intro check function.
The beginning of each track is played for
10 seconds each.
R PROGRAM,CHECK,CLEAR button
These buttons are used for programmed
playback.
S SEARCH buttons
Hold down these buttons to search for a
part of a track.
TAPE
a Cassette holder
b SEARCH button
Use these buttons to fast-forward or
rewind the tape.
c STOP button
Use this button to stop playback or
recording.
d PAUSE button
Use this button to pause playback or
recording.
e PLAY buttons(forward/reverse)
Use these buttons to start playback of the
tape.
f COUNTER RESET button
Press this button to clear the tape
counter to 0000.
ENGLISH
g
f
p
o
g
RTZ button
Press this button to locate the "0000" point
of the tape.
h DOLBY NR switch
Select ON for the tape recorded or to be
recorded with DOLBY B NR.
Select OFF for the tape recorded or to be
recorded without DOLBY B NR.
i
REV MODE selector
Use this switch to select the reverse
mode.
j
SOURCE selector
Use this switch to select the source to be
recorded.
k EJECT button
Use this button to open the cassette
holder.
l REC MUTE button
Use this button to insert a blank space of
about 4 seconds during recording.
m RECORD button
Use this button to enter record pause
mode.
n CD SYNC button
Use this button for CD synchronous
recording.
o
INPUT control
Use this control to adjust the recording
level.
p
PITCH CONTROL knob
Turn this knob to change the speed of
playback.
Usually, set the knob to the center.
21