Connecting To The Network Through Lan Interface; Connecting With A Lan Cable (Wired Lan); Connecting The Power Cord - Pioneer BDP-88FD Manual De Instrucciones

Connecting to the
network through LAN
interface
By connecting this player to the network via the LAN
terminal, you can play image, audio and video files stored
on the components on the network, including your
computer, using Source inputs.
Turn on the DHCP server function of your router. In case
your router does not have the built-in DHCP server
function, it is necessary to set up the network manually.
For details, see Setting the IP address on page 47 .
Note
• Refer to the operation manual of the equipment you
have as the connected equipment and connection
method may differ depending on your Internet
environment.
• When using a broadband Internet connection, a
contract with an Internet service provider is required.
For more details, contact your nearest Internet
service provider.
• Please note that Pioneer will accept no responsibility
whatsoever for communications errors or problems
related to the user's network connection environment
or connected devices. Contact your provider or the
manufacturer of your connected devices.
Connecting with a LAN cable
(wired LAN)
Connect the LAN terminal on this receiver to the LAN
terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or
higher).
BDP-88FD's rear panel
ZERO SIGNAL RS-232C
DMI OUT DIGITAL AUDIO OUT LAN
(10/100)
MAIN
OPTICAL COAXIAL
LAN cable
(commercially
available)
LAN
Computer
USB
Modem
Internet
3 2 1 WAN
Router
LAN cable
(commercially available)
 LAN terminal specifications
LAN terminal: Ethernet jack (10BASE-T/100BASE-TX)
Connecting the power
cord
Connect the power cord after all the connections between
devices have been completed.
BDP-88FD's rear panel
To wall outlet
02
AC IN
Power cord
(included)
23
En